dashGPS – /branches/dashGPS-bmp/inc/display.h

Rev 26 – Modified for two BME280 sensors.

mjames — Tue, 31 Aug 2021 11:09:17 +0000

mjames – 6 file(s) modified
Modified for two BME280 sensors.

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /branches/dashGPS-bmp/USB_DEVICE/Target/usbd_conf.h
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 20 – Fixed a couple of files that had not been correctly ...

mjames — Thu, 22 Jul 2021 16:39:06 +0000

mjames – 51 file(s) modified
Fixed a couple of files that had not been correctly checked in.

~ /branches/dashGPS-bmp/build/DashGPS.map
~ /branches/dashGPS-bmp/build/displayFont.cpp
~ /branches/dashGPS-bmp/build/fontclass.cpp
~ /branches/dashGPS-bmp/build/main.d
~ /branches/dashGPS-bmp/build/nmea.lst
~ /branches/dashGPS-bmp/build/small_printf.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_cortex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_exti.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_i2c.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_msp.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_spi.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_uart.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_ll_usb.lst
~ /branches/dashGPS-bmp/build/system_stm32f1xx.lst
~ /branches/dashGPS-bmp/build/usbd_cdc_if.lst
~ /branches/dashGPS-bmp/build/usbd_ioreq.lst
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /trunk/build/ap_math.cpp
~ /trunk/build/bmp280.lst
~ /trunk/build/DashGPS.bin
~ /trunk/build/DashGPS.elf
~ /trunk/build/DashGPS.hex
~ /trunk/build/display.cpp
~ /trunk/build/displayclass.cpp
~ /trunk/build/displayDial.cpp
~ /trunk/build/main.lst
~ /trunk/build/serial.lst
~ /trunk/build/stm32f1xx_hal_dma.lst
~ /trunk/build/stm32f1xx_hal_flash_ex.lst
~ /trunk/build/stm32f1xx_hal_gpio.lst
~ /trunk/build/stm32f1xx_hal_pwr.lst
~ /trunk/build/stm32f1xx_hal_rcc_ex.lst
~ /trunk/build/stm32f1xx_hal_rtc.lst
~ /trunk/build/stm32f1xx_hal_rtc_ex.lst
~ /trunk/build/stm32f1xx_hal_tim.lst
~ /trunk/build/stm32f1xx_hal_tim_ex.lst
~ /trunk/build/stm32f1xx_it.lst
~ /trunk/build/stm32_halDisplay.cpp
~ /trunk/build/usbd_cdc.lst
~ /trunk/build/usbd_conf.lst
~ /trunk/build/usbd_core.lst
~ /trunk/build/usbd_ctlreq.lst
~ /trunk/build/usbd_desc.lst
~ /trunk/build/usb_device.lst

Rev 19 – Commit this branch as I do not have a BME280 ...

mjames — Thu, 22 Jul 2021 16:12:12 +0000

mjames – 57 file(s) modified
Commit this branch as I do not have a BME280 to work with

~ /branches/dashGPS-bmp/build/ap_math.cpp
+ /branches/dashGPS-bmp/build/bme280.d
+ /branches/dashGPS-bmp/build/bme280.lst
~ /branches/dashGPS-bmp/build/bmp280.lst
~ /branches/dashGPS-bmp/build/DashGPS.bin
~ /branches/dashGPS-bmp/build/DashGPS.elf
~ /branches/dashGPS-bmp/build/DashGPS.hex
~ /branches/dashGPS-bmp/build/DashGPS.map
~ /branches/dashGPS-bmp/build/display.cpp
~ /branches/dashGPS-bmp/build/display.d
~ /branches/dashGPS-bmp/build/displayclass.cpp
~ /branches/dashGPS-bmp/build/displayDial.cpp
~ /branches/dashGPS-bmp/build/displayFont.cpp
~ /branches/dashGPS-bmp/build/fontclass.cpp
~ /branches/dashGPS-bmp/build/main.d
~ /branches/dashGPS-bmp/build/main.lst
~ /branches/dashGPS-bmp/build/nmea.lst
~ /branches/dashGPS-bmp/build/serial.lst
~ /branches/dashGPS-bmp/build/small_printf.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_cortex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_dma.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_exti.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_i2c.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_msp.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pwr.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rtc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rtc_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_spi.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_tim.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_tim_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_uart.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_it.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_ll_usb.lst
~ /branches/dashGPS-bmp/build/stm32_halDisplay.cpp
~ /branches/dashGPS-bmp/build/system_stm32f1xx.lst
~ /branches/dashGPS-bmp/build/usbd_cdc.lst
~ /branches/dashGPS-bmp/build/usbd_cdc_if.lst
~ /branches/dashGPS-bmp/build/usbd_conf.lst
~ /branches/dashGPS-bmp/build/usbd_core.lst
~ /branches/dashGPS-bmp/build/usbd_ctlreq.lst
~ /branches/dashGPS-bmp/build/usbd_desc.lst
~ /branches/dashGPS-bmp/build/usbd_ioreq.lst
~ /branches/dashGPS-bmp/build/usb_device.lst
~ /branches/dashGPS-bmp/Core/Src/main.c
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /branches/dashGPS-bmp/src/display.cpp

Rev 18 – Creating a branch to try BME Environmental sensor with humidity

mjames — Sun, 11 Jul 2021 19:08:35 +0000

mjames – 1 file(s) modified
Creating a branch to try BME Environmental sensor with humidity

+ /branches/dashGPS-bmp (copied from /trunk@16)

Rev 11 – Added BMP280 sensor, and changed serial API

mjames — Sun, 03 Jan 2021 08:33:37 +0000

mjames – 7 file(s) modified
Added BMP280 sensor, and changed serial API

~ /trunk/Core/Inc/stm32f1xx_hal_conf.h
~ /trunk/Core/Src/main.c
~ /trunk/Core/Src/stm32f1xx_hal_msp.c
~ /trunk/DashGPS.ioc
~ /trunk/inc/display.h
~ /trunk/Makefile
~ /trunk/src/display.cpp

Rev 6 – Added call-out from C to C++ to allow using libOLED ...

mjames — Mon, 02 Nov 2020 21:03:00 +0000

mjames – 5 file(s) modified
Added call-out from C to C++ to allow using libOLED C++ library

~ /trunk/Core/Src/main.c
+ /trunk/inc/display.h
+ /trunk/inc/ssd1306_config.h
~ /trunk/Makefile
+ /trunk/src/display.cpp