dashGPS – /branches/

Rev 31 – Adding second I2C bus for extension as it crashed .

mjames — Tue, 10 May 2022 19:03:00 +0000

mjames – 4 file(s) modified
Adding second I2C bus for extension as it crashed .

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 29 – Added power down to I2C1 bus - used a GPIO ...

mjames — Tue, 11 Jan 2022 14:21:10 +0000

mjames – 5 file(s) modified
Added power down to I2C1 bus - used a GPIO pin to power the low-power bus devices .

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/Makefile
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 28 – Setup to use I2C1 for the external I2C bus.

mjames — Mon, 10 Jan 2022 20:34:53 +0000

mjames – 6 file(s) modified
Setup to use I2C1 for the external I2C bus.

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/Core/Src/stm32f1xx_hal_msp.c
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/Makefile
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 27 – Added watchdog timer, Updated to use new serial driver ...

mjames — Wed, 29 Dec 2021 17:18:25 +0000

mjames – 7 file(s) modified
Added watchdog timer,
Updated to use new serial driver code.

~ /branches/dashGPS-bmp/.mxproject
~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/Core/Inc/stm32f1xx_hal_conf.h
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/Makefile
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 26 – Modified for two BME280 sensors.

mjames — Tue, 31 Aug 2021 11:09:17 +0000

mjames – 6 file(s) modified
Modified for two BME280 sensors.

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /branches/dashGPS-bmp/USB_DEVICE/Target/usbd_conf.h
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 25 – Improved average speed.

mjames — Thu, 26 Aug 2021 14:06:42 +0000

mjames – 4 file(s) modified
Improved average speed.

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 24 – Reducing the rate of buffer overflows.

mjames — Tue, 24 Aug 2021 11:12:00 +0000

mjames – 3 file(s) modified
Reducing the rate of buffer overflows.

~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 22 – Updated to new STM32 lib API for UART

mjames — Mon, 23 Aug 2021 15:23:14 +0000

mjames – 5 file(s) modified
Updated to new STM32 lib API for UART

~ /branches/dashGPS-bmp/Core/Src/stm32f1xx_it.c
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/Makefile
~ /trunk/Core/Src/main.c
~ /trunk/src/display.cpp

Rev 21 – Updated to add encoder push button and encoder pins for ...

mjames — Fri, 13 Aug 2021 09:41:15 +0000

mjames – 53 file(s) modified
Updated to add encoder push button and encoder pins for dial

~ /branches/dashGPS-bmp/build/DashGPS.map
~ /branches/dashGPS-bmp/build/displayFont.cpp
~ /branches/dashGPS-bmp/build/fontclass.cpp
~ /branches/dashGPS-bmp/build/nmea.lst
~ /branches/dashGPS-bmp/build/small_printf.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_cortex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_exti.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_i2c.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_msp.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_spi.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_uart.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_ll_usb.lst
~ /branches/dashGPS-bmp/build/system_stm32f1xx.lst
~ /branches/dashGPS-bmp/build/usbd_cdc_if.lst
~ /branches/dashGPS-bmp/build/usbd_ioreq.lst
~ /branches/dashGPS-bmp/Core/Inc/main.h
~ /branches/dashGPS-bmp/Core/Src/stm32f1xx_hal_msp.c
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/Makefile
~ /trunk/build/ap_math.cpp
~ /trunk/build/bmp280.lst
~ /trunk/build/DashGPS.bin
~ /trunk/build/DashGPS.elf
~ /trunk/build/DashGPS.hex
~ /trunk/build/display.cpp
~ /trunk/build/displayclass.cpp
~ /trunk/build/displayDial.cpp
~ /trunk/build/main.lst
~ /trunk/build/serial.lst
~ /trunk/build/stm32f1xx_hal_dma.lst
~ /trunk/build/stm32f1xx_hal_flash_ex.lst
~ /trunk/build/stm32f1xx_hal_gpio.lst
~ /trunk/build/stm32f1xx_hal_pwr.lst
~ /trunk/build/stm32f1xx_hal_rcc_ex.lst
~ /trunk/build/stm32f1xx_hal_rtc.lst
~ /trunk/build/stm32f1xx_hal_rtc_ex.lst
~ /trunk/build/stm32f1xx_hal_tim.lst
~ /trunk/build/stm32f1xx_hal_tim_ex.lst
~ /trunk/build/stm32f1xx_it.lst
~ /trunk/build/stm32_halDisplay.cpp
~ /trunk/build/usbd_cdc.lst
~ /trunk/build/usbd_conf.lst
~ /trunk/build/usbd_core.lst
~ /trunk/build/usbd_ctlreq.lst
~ /trunk/build/usbd_desc.lst
~ /trunk/build/usb_device.lst
~ /trunk/Core/Src/main.c

Rev 20 – Fixed a couple of files that had not been correctly ...

mjames — Thu, 22 Jul 2021 16:39:06 +0000

mjames – 51 file(s) modified
Fixed a couple of files that had not been correctly checked in.

~ /branches/dashGPS-bmp/build/DashGPS.map
~ /branches/dashGPS-bmp/build/displayFont.cpp
~ /branches/dashGPS-bmp/build/fontclass.cpp
~ /branches/dashGPS-bmp/build/main.d
~ /branches/dashGPS-bmp/build/nmea.lst
~ /branches/dashGPS-bmp/build/small_printf.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_cortex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_exti.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_i2c.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_msp.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_spi.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_uart.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_ll_usb.lst
~ /branches/dashGPS-bmp/build/system_stm32f1xx.lst
~ /branches/dashGPS-bmp/build/usbd_cdc_if.lst
~ /branches/dashGPS-bmp/build/usbd_ioreq.lst
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /trunk/build/ap_math.cpp
~ /trunk/build/bmp280.lst
~ /trunk/build/DashGPS.bin
~ /trunk/build/DashGPS.elf
~ /trunk/build/DashGPS.hex
~ /trunk/build/display.cpp
~ /trunk/build/displayclass.cpp
~ /trunk/build/displayDial.cpp
~ /trunk/build/main.lst
~ /trunk/build/serial.lst
~ /trunk/build/stm32f1xx_hal_dma.lst
~ /trunk/build/stm32f1xx_hal_flash_ex.lst
~ /trunk/build/stm32f1xx_hal_gpio.lst
~ /trunk/build/stm32f1xx_hal_pwr.lst
~ /trunk/build/stm32f1xx_hal_rcc_ex.lst
~ /trunk/build/stm32f1xx_hal_rtc.lst
~ /trunk/build/stm32f1xx_hal_rtc_ex.lst
~ /trunk/build/stm32f1xx_hal_tim.lst
~ /trunk/build/stm32f1xx_hal_tim_ex.lst
~ /trunk/build/stm32f1xx_it.lst
~ /trunk/build/stm32_halDisplay.cpp
~ /trunk/build/usbd_cdc.lst
~ /trunk/build/usbd_conf.lst
~ /trunk/build/usbd_core.lst
~ /trunk/build/usbd_ctlreq.lst
~ /trunk/build/usbd_desc.lst
~ /trunk/build/usb_device.lst

Rev 19 – Commit this branch as I do not have a BME280 ...

mjames — Thu, 22 Jul 2021 16:12:12 +0000

mjames – 57 file(s) modified
Commit this branch as I do not have a BME280 to work with

~ /branches/dashGPS-bmp/build/ap_math.cpp
+ /branches/dashGPS-bmp/build/bme280.d
+ /branches/dashGPS-bmp/build/bme280.lst
~ /branches/dashGPS-bmp/build/bmp280.lst
~ /branches/dashGPS-bmp/build/DashGPS.bin
~ /branches/dashGPS-bmp/build/DashGPS.elf
~ /branches/dashGPS-bmp/build/DashGPS.hex
~ /branches/dashGPS-bmp/build/DashGPS.map
~ /branches/dashGPS-bmp/build/display.cpp
~ /branches/dashGPS-bmp/build/display.d
~ /branches/dashGPS-bmp/build/displayclass.cpp
~ /branches/dashGPS-bmp/build/displayDial.cpp
~ /branches/dashGPS-bmp/build/displayFont.cpp
~ /branches/dashGPS-bmp/build/fontclass.cpp
~ /branches/dashGPS-bmp/build/main.d
~ /branches/dashGPS-bmp/build/main.lst
~ /branches/dashGPS-bmp/build/nmea.lst
~ /branches/dashGPS-bmp/build/serial.lst
~ /branches/dashGPS-bmp/build/small_printf.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_cortex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_dma.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_exti.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_flash_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_gpio_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_i2c.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_msp.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pcd_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_pwr.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rcc_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rtc.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_rtc_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_spi.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_tim.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_tim_ex.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_hal_uart.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_it.lst
~ /branches/dashGPS-bmp/build/stm32f1xx_ll_usb.lst
~ /branches/dashGPS-bmp/build/stm32_halDisplay.cpp
~ /branches/dashGPS-bmp/build/system_stm32f1xx.lst
~ /branches/dashGPS-bmp/build/usbd_cdc.lst
~ /branches/dashGPS-bmp/build/usbd_cdc_if.lst
~ /branches/dashGPS-bmp/build/usbd_conf.lst
~ /branches/dashGPS-bmp/build/usbd_core.lst
~ /branches/dashGPS-bmp/build/usbd_ctlreq.lst
~ /branches/dashGPS-bmp/build/usbd_desc.lst
~ /branches/dashGPS-bmp/build/usbd_ioreq.lst
~ /branches/dashGPS-bmp/build/usb_device.lst
~ /branches/dashGPS-bmp/Core/Src/main.c
~ /branches/dashGPS-bmp/DashGPS.ioc
~ /branches/dashGPS-bmp/inc/display.h
~ /branches/dashGPS-bmp/Makefile
~ /branches/dashGPS-bmp/src/display.cpp

Rev 18 – Creating a branch to try BME Environmental sensor with humidity

mjames — Sun, 11 Jul 2021 19:08:35 +0000

mjames – 1 file(s) modified
Creating a branch to try BME Environmental sensor with humidity

+ /branches/dashGPS-bmp (copied from /trunk@16)

Rev 17 – Creating branches folder

mjames — Sun, 11 Jul 2021 19:07:42 +0000

mjames – 1 file(s) modified
Creating branches folder

+ /branches