Subversion Repositories EngineBay2

Rev

Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
34 1738 d 23 h mjames /trunk/Src/ Updated the minimum ignition pulse to 2.5mS  
32 1918 d 20 h mjames /trunk/ Updated  
31 1975 d 0 h mjames /trunk/ Altered to read SPI temperature sensors after ignition pulse goes low.  
30 1975 d 2 h mjames /trunk/ Removed wrap-around error in calculation of RPM (needed short int for modulo maths)  
29 1975 d 4 h mjames /trunk/ Fixed timer 3 as a trigger for the ADC  
28 1988 d 0 h mjames /trunk/ Updated to use the new libSerial - which doesnt reset the PLX timeout flag.  
27 2416 d 1 h mjames /trunk/Src/ Modified calibration of MAP sensor after using proper pressure gauge  
26 2716 d 1 h mjames /trunk/Src/ Added sensing of ignition pulses to reading CHT to avoid measuring just after rising efdge of ignition pulse.  
25 3010 d 2 h mjames /trunk/Src/ Enabled second CHT sender  
24 3010 d 4 h mjames /trunk/Src/ Changed MAP calibration.  
23 3267 d 23 h mjames /trunk/Src/ Changed CHT filter algorithm  
22 3290 d 0 h mjames /trunk/ Changed timeouts on ignition-on wire to 1 second as filtering sometimes seems to fail
Deleted 1023 reading CHT samples that happen from time to time.		  
21 3318 d 20 h mjames /trunk/ Adjusted SPI clock phase back to correct, fixed zero display of CHT issues - the CHT sensor would give an 'invalid' reading and this would cause a change in the value sent to the dashboard to be zero. Invalid readings are now ignored, and the code simply repeats the last good value instead.  
20 3319 d 22 h mjames /trunk/ Slowing SPI. Debounce Ignition switch feed. Fix initial CHT power supply issue.  
19 3336 d 23 h mjames /trunk/Src/ Error in timeouts handler code ffixed. now updates properly  
18 3338 d 20 h mjames /trunk/ Changed pinout : provided a timer to turn off power to CHT sensors when the engine is started. Added CPU temperature  
17 3454 d 20 h mjames /trunk/ Implemented sensor filtering for RPM, MAP , Oil Press and battery voltage.  
16 3460 d 20 h mjames /trunk/ Engine bay sends test timing value, also extended PLX messages with CHT  
14 3463 d 20 h mjames /trunk/ ADC running under interrupt off timer 6 and using DMA to control filling of circular buffer  
13 3463 d 20 h mjames /trunk/ Starting to understand how to use HAL_MSP functions to actually enable sub-blocks mentioned in STMCubeMX ..
RPM counter functional		  

←Prev12Next→

Show All