Subversion Repositories EngineBay2

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
18 3341 d 16 h mjames /trunk/ Changed pinout : provided a timer to turn off power to CHT sensors when the engine is started. Added CPU temperature  
17 3457 d 17 h mjames /trunk/ Implemented sensor filtering for RPM, MAP , Oil Press and battery voltage.  
16 3463 d 16 h mjames /trunk/ Engine bay sends test timing value, also extended PLX messages with CHT  
14 3466 d 16 h mjames /trunk/ ADC running under interrupt off timer 6 and using DMA to control filling of circular buffer  
13 3466 d 17 h mjames /trunk/ Starting to understand how to use HAL_MSP functions to actually enable sub-blocks mentioned in STMCubeMX ..
RPM counter functional		  
12 3468 d 17 h mjames /trunk/ Timer2 runs  
11 3468 d 19 h mjames /trunk/Src/ Corrected too-fast access to the thermocouple IC  
10 3471 d 15 h mjames /trunk/ SPI temperature sensor not using correct NSS pin. Going to bed.  
9 3471 d 23 h mjames /trunk/ Updated to include reading CHT thermocouple. Not yet calibrated .  
8 3472 d 2 h mjames /trunk/ Blinking light on timer 6 interrupt now works  
7 3472 d 3 h mjames /trunk/ First serial echo on debug USART2 . Good.  
6 3477 d 23 h mjames /trunk/ Starting to work on ADC with DMA and interrupt for completed conversion  
5 3484 d 5 h mjames /trunk/ Some updates to initialisation  
3 3485 d 17 h mjames /trunk/ Added files from older project  
2 3486 d 19 h mjames /trunk/ Initial project creation