Subversion Repositories EngineBay2

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
45 1305 d 22 h mjames /branches/stm32f103/ Adjusted changes in rev counter  
43 1561 d 3 h mjames /branches/stm32f103/ Swapped over SPI_CS_D and SPI_CS_Clk pins to match actual wiring  
42 1607 d 22 h mjames /branches/stm32f103/ Updated to use shift register to clock Chip selects for SPI temperature sensors.  
41 1731 d 2 h mjames /branches/stm32f103/ Updated for 72MHz timers. Triggered temperature sample 2mS after CB opens.  
40 1736 d 2 h mjames /branches/stm32f103/ Corrected prescaler values - RPM was reading 2x correct value .
Altered SPI speed for temperature sensors.		  
39 1738 d 3 h mjames /branches/stm32f103/ Updated to auto calibrate ADC, and use on-chip thermometer.  
37 1740 d 21 h mjames /branches/stm32f103/ Changed to use STM32F103 Blue Pill instead of Nucleo board as these are now expensive.  
36 1741 d 1 h mjames /branches/ Changed name of branch because it has inconsistent case  
35 1741 d 1 h mjames /branches/stm32F103/ Making a branch to change to using Blue Pill from Nucleo board.  
31 1977 d 2 h mjames /trunk/ Altered to read SPI temperature sensors after ignition pulse goes low.  
30 1977 d 4 h mjames /trunk/ Removed wrap-around error in calculation of RPM (needed short int for modulo maths)  
29 1977 d 5 h mjames /trunk/ Fixed timer 3 as a trigger for the ADC  
28 1990 d 2 h mjames /trunk/ Updated to use the new libSerial - which doesnt reset the PLX timeout flag.  
9 3471 d 4 h mjames /trunk/ Updated to include reading CHT thermocouple. Not yet calibrated .  
6 3477 d 4 h mjames /trunk/ Starting to work on ADC with DMA and interrupt for completed conversion  
3 3484 d 22 h mjames /trunk/ Added files from older project  
2 3486 d 0 h mjames /trunk/ Initial project creation