Subversion Repositories EngineBay2

Rev

Go to most recent revision | Show changed files | Details | Compare with Previous | Blame | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
41 1731 d 5 h mjames /branches/stm32f103/ Updated for 72MHz timers. Triggered temperature sample 2mS after CB opens.  
40 1736 d 5 h mjames /branches/stm32f103/ Corrected prescaler values - RPM was reading 2x correct value .
Altered SPI speed for temperature sensors.		  
39 1738 d 6 h mjames /branches/stm32f103/ Updated to auto calibrate ADC, and use on-chip thermometer.  
37 1741 d 1 h mjames /branches/stm32f103/ Changed to use STM32F103 Blue Pill instead of Nucleo board as these are now expensive.  
36 1741 d 4 h mjames /branches/ Changed name of branch because it has inconsistent case  
35 1741 d 4 h mjames /branches/stm32F103/ Making a branch to change to using Blue Pill from Nucleo board.  
31 1977 d 5 h mjames /trunk/ Altered to read SPI temperature sensors after ignition pulse goes low.  
29 1977 d 9 h mjames /trunk/ Fixed timer 3 as a trigger for the ADC  
28 1990 d 5 h mjames /trunk/ Updated to use the new libSerial - which doesnt reset the PLX timeout flag.  
21 3321 d 0 h mjames /trunk/ Adjusted SPI clock phase back to correct, fixed zero display of CHT issues - the CHT sensor would give an 'invalid' reading and this would cause a change in the value sent to the dashboard to be zero. Invalid readings are now ignored, and the code simply repeats the last good value instead.  
20 3322 d 3 h mjames /trunk/ Slowing SPI. Debounce Ignition switch feed. Fix initial CHT power supply issue.  
18 3341 d 1 h mjames /trunk/ Changed pinout : provided a timer to turn off power to CHT sensors when the engine is started. Added CPU temperature  
17 3457 d 1 h mjames /trunk/ Implemented sensor filtering for RPM, MAP , Oil Press and battery voltage.  
15 3466 d 0 h mjames /trunk/ ADC running under interrupt off timer 6 and using DMA to control filling of circular buffer  
14 3466 d 0 h mjames /trunk/ ADC running under interrupt off timer 6 and using DMA to control filling of circular buffer  
13 3466 d 1 h mjames /trunk/ Starting to understand how to use HAL_MSP functions to actually enable sub-blocks mentioned in STMCubeMX ..
RPM counter functional		  
12 3468 d 2 h mjames /trunk/ Timer2 runs  
10 3471 d 0 h mjames /trunk/ SPI temperature sensor not using correct NSS pin. Going to bed.  
8 3471 d 11 h mjames /trunk/ Blinking light on timer 6 interrupt now works  
7 3471 d 11 h mjames /trunk/ First serial echo on debug USART2 . Good.  

←Prev12Next→

Show All