Subversion Repositories dashGPS

Rev

Show changed files | Directory listing | RSS feed

Filtering Options

Rev Age Author Path Log message Diff
32 1195 d 13 h mjames /trunk/Core/Src/ Reformatted  
31 1425 d 11 h mjames / Adding second I2C bus for extension as it crashed .  
30 1544 d 16 h mjames /trunk/ Updated error check for remote I2C device failure..  
29 1544 d 16 h mjames / Added power down to I2C1 bus - used a GPIO pin to power the low-power bus devices .  
28 1545 d 10 h mjames / Setup to use I2C1 for the external I2C bus.  
27 1557 d 13 h mjames / Added watchdog timer,
Updated to use new serial driver code.		  
26 1677 d 19 h mjames / Modified for two BME280 sensors.  
25 1682 d 16 h mjames / Improved average speed.  
24 1684 d 19 h mjames / Reducing the rate of buffer overflows.  
23 1685 d 11 h mjames /trunk/ Altered buffer size, and start up of speed averaging code.
Need to drop baud rate from 115200 as this is causing buffer overflow.		  
22 1685 d 15 h mjames / Updated to new STM32 lib API for UART  
21 1695 d 21 h mjames / Updated to add encoder push button and encoder pins for dial  
16 1740 d 11 h mjames /trunk/ Changed print formatting to use NMEA XDR messages, and remember to ground the CS0 of the Bosch BMP280 sensor.  
14 1745 d 11 h mjames /trunk/Core/Src/ Reduced temperature read to every 5 secs  
13 1917 d 19 h mjames /trunk/ Update to provide USB CDC UART access for debug/logging.  
12 1917 d 20 h mjames /trunk/Core/Src/ Increased measurement rate on temperature to 2Hz  
11 1917 d 22 h mjames /trunk/ Added BMP280 sensor, and changed serial API  
9 1973 d 14 h mjames /trunk/ Updated to show time, correctly read GPS data when buffer overflows.  
8 1976 d 9 h mjames /trunk/ Displays a small display  
6 1979 d 9 h mjames /trunk/ Added call-out from C to C++ to allow using libOLED C++ library  

←Prev12Next→

Show All