Rev 10 | Rev 13 | Go to most recent revision | Show entire file | Ignore whitespace | Details | Blame | Last modification | View Log | RSS feed
| Rev 10 | Rev 11 | ||
|---|---|---|---|
| Line 3... | Line 3... | ||
| 3 | #include <cstring> |
3 | #include <cstring> |
| 4 | #include "libOLED/stm32_halDisplay.H" |
4 | #include "libOLED/stm32_halDisplay.H" |
| 5 | #include "libOLED/fontclass.H" |
5 | #include "libOLED/fontclass.H" |
| 6 | #include "libOLED/displayDial.H" |
6 | #include "libOLED/displayDial.H" |
| 7 | 7 | ||
| - | 8 | #include "libBMP280/bmp280.h" |
|
| - | 9 | ||
| 8 | namespace |
10 | namespace |
| 9 | { |
11 | { |
| 10 | int const WIDTH = 128; |
12 | int const WIDTH = 128; |
| 11 | int const HEIGHT = 64; |
13 | int const HEIGHT = 64; |
| 12 | int const DISPLAY_RAMWIDTH = 132; |
14 | int const DISPLAY_RAMWIDTH = 132; |
| Line 16... | Line 18... | ||
| 16 | float speedMPH = 0.0; |
18 | float speedMPH = 0.0; |
| 17 | float speedAVG = 0.0; |
19 | float speedAVG = 0.0; |
| 18 | int heading = 0; |
20 | int heading = 0; |
| 19 | Location loc; |
21 | Location loc; |
| 20 | 22 | ||
| - | 23 | uint32_t lastTick = 0; |
|
| - | 24 | int32_t temp32 = 0; |
|
| - | 25 | uint32_t pres32 = 0; |
|
| - | 26 | int32_t rslt; |
|
| - | 27 | ||
| 21 | uint8_t displayBuffer[dataSize (WIDTH, HEIGHT)]; |
28 | uint8_t displayBuffer[dataSize (WIDTH, HEIGHT)]; |
| 22 | 29 | ||
| 23 | stm32_halDisplay_t display1 (WIDTH, HEIGHT, DISPLAY_RAMWIDTH, displayBuffer, |
30 | stm32_halDisplay_t display1 (WIDTH, HEIGHT, DISPLAY_RAMWIDTH, displayBuffer, |
| 24 | &hspi1, |
31 | &hspi1, |
| 25 | 32 | ||
| Line 33... | Line 40... | ||
| 33 | displayDial_t dial (display1, 96, 32, 32, 180); |
40 | displayDial_t dial (display1, 96, 32, 32, 180); |
| 34 | 41 | ||
| 35 | extern "C" void |
42 | extern "C" void |
| 36 | cc_init () |
43 | cc_init () |
| 37 | { |
44 | { |
| - | 45 | display1.reset (); |
|
| - | 46 | ||
| 38 | display1.init (); |
47 | display1.init (); |
| 39 | display1.clearDisplay (); |
48 | display1.clearDisplay (); |
| 40 | 49 | ||
| 41 | dial.draw_scale (0, 360, 8, 1, 45); |
50 | dial.draw_scale (0, 360, 8, 1, 45); |
| 42 | 51 | ||
| Line 45... | Line 54... | ||
| 45 | memset (loc.time, '-', 6); |
54 | memset (loc.time, '-', 6); |
| 46 | } |
55 | } |
| 47 | 56 | ||
| 48 | char fontBuf[] = "01234567"; |
57 | char fontBuf[] = "01234567"; |
| 49 | extern "C" void |
58 | extern "C" void |
| 50 | cc_run () |
59 | cc_run (struct bmp280_dev *bmp) |
| - | 60 | ||
| 51 | { |
61 | { |
| 52 | 62 | ||
| 53 | display1.clearDisplay (); |
63 | display1.clearDisplay (); |
| 54 | dial.draw_scale (0, 360, 8, 1, 45); |
64 | dial.draw_scale (0, 360, 8, 1, 45); |
| 55 | 65 | ||
| Line 57... | Line 67... | ||
| 57 | if (loc.good) |
67 | if (loc.good) |
| 58 | { |
68 | { |
| 59 | heading = loc.heading; |
69 | heading = loc.heading; |
| 60 | 70 | ||
| 61 | loc.good = false; |
71 | loc.good = false; |
| 62 | } |
72 | } |
| 63 | if(loc.valid=='V') |
73 | if (loc.valid == 'V') |
| 64 | memset(loc.time,'-',6 ); |
74 | memset (loc.time, '-', 6); |
| 65 | 75 | ||
| 66 | // print out the GMT time at the top of the screen |
76 | // print out the GMT time at the top of the screen |
| 67 | display1.gotoxy (0, 0); |
77 | display1.gotoxy (0, 0); |
| 68 | display1.printString (small_font, &loc.time[0], 2, WHITE); |
78 | display1.printString (small_font, &loc.time[0], 2, WHITE); |
| 69 | display1.printString (small_font, ":", 1, WHITE); |
79 | display1.printString (small_font, ":", 1, WHITE); |
| 70 | display1.printString (small_font, &loc.time[2], 2, WHITE); |
80 | display1.printString (small_font, &loc.time[2], 2, WHITE); |
| 71 | 81 | ||
| 72 | display1.printString (small_font, ":", 1, WHITE); |
82 | display1.printString (small_font, ":", 1, WHITE); |
| 73 | display1.printString (small_font, &loc.time[4], 2, WHITE); |
83 | display1.printString (small_font, &loc.time[4], 2, WHITE); |
| 74 | int dial_ang = heading + 180; |
84 | int dial_ang = heading + 180; |
| 75 | dial.draw_needle (dial_ang); |
85 | dial.draw_needle (dial_ang); |
| 76 | - | ||
| 77 | display1.gotoxy (70, 25); |
- | |
| 78 | if (loc.valid=='A') |
- | |
| 79 | { |
- | |
| 80 | display1.fontDigits (large_font, 3, -1, heading); |
- | |
| 81 | } |
- | |
| 82 | else |
- | |
| 83 | display1.printString (large_font, "GPS?", 4, WHITE); |
- | |
| 84 | - | ||
| 85 | - | ||
| 86 | if(loc.valid == 'A') |
- | |
| 87 | speedMPH = loc.speed / 1.815; |
- | |
| 88 | - | ||
| 89 | display1.gotoxy (0, 8); |
- | |
| 90 | display1.printString(small_font,"Speed",5, WHITE); |
- | |
| 91 | display1.gotoxy (0, 16); |
- | |
| 92 | display1.fontDigits(large_font, 4,1,speedMPH * 10); |
- | |
| 93 | - | ||
| 94 | display1.gotoxy (0, 32); |
- | |
| 95 | display1.printString(small_font,"Average",7, WHITE); |
- | |
| 96 | display1.gotoxy (0, 40); |
- | |
| 97 | display1.fontDigits(large_font, 4,1,speedAVG * 10); |
- | |
| 98 | 86 | ||
| - | 87 | display1.gotoxy (70, 25); |
|
| - | 88 | if (loc.valid == 'A') |
|
| - | 89 | { |
|
| - | 90 | display1.fontDigits (large_font, 3, -1, heading); |
|
| - | 91 | } |
|
| - | 92 | else |
|
| - | 93 | display1.printString (large_font, "GPS?", 4, WHITE); |
|
| - | 94 | ||
| - | 95 | if (loc.valid == 'A') |
|
| - | 96 | speedMPH = loc.speed / 1.815; |
|
| - | 97 | ||
| - | 98 | display1.gotoxy (0, 8); |
|
| - | 99 | display1.printString (small_font, "Speed", 5, WHITE); |
|
| - | 100 | display1.gotoxy (0, 16); |
|
| - | 101 | display1.fontDigits (large_font, 4, 1, speedMPH * 10); |
|
| - | 102 | ||
| - | 103 | display1.gotoxy (0, 32); |
|
| - | 104 | display1.printString (small_font, "Average", 7, WHITE); |
|
| - | 105 | display1.gotoxy (0, 40); |
|
| - | 106 | display1.fontDigits (large_font, 4, 1, speedAVG * 10); |
|
| 99 | 107 | ||
| - | 108 | struct bmp280_uncomp_data ucomp_data; |
|
| 100 | 109 | ||
| - | 110 | if (HAL_GetTick () - lastTick > 1000) |
|
| - | 111 | { |
|
| - | 112 | lastTick = HAL_GetTick (); |
|
| - | 113 | /* Reading the raw data from sensor */ |
|
| - | 114 | rslt = bmp280_get_uncomp_data (&ucomp_data, bmp); |
|
| - | 115 | ||
| - | 116 | if (rslt == BMP280_OK) |
|
| - | 117 | { |
|
| - | 118 | /* Getting the 32 bit compensated temperature */ |
|
| - | 119 | rslt = bmp280_get_comp_temp_32bit (&temp32, ucomp_data.uncomp_temp, |
|
| - | 120 | bmp); |
|
| - | 121 | ||
| - | 122 | rslt = bmp280_get_comp_pres_32bit (&pres32, ucomp_data.uncomp_press, |
|
| - | 123 | bmp); |
|
| - | 124 | ||
| - | 125 | } |
|
| - | 126 | } |
|
| - | 127 | display1.gotoxy (0, 56); |
|
| - | 128 | display1.printString (small_font, "T", 2, WHITE); |
|
| - | 129 | display1.fontDigits (small_font, 4, 1, temp32/10, WHITE); |
|
| - | 130 | display1.printString (small_font, " P", 2, WHITE); |
|
| - | 131 | display1.fontDigits (small_font, 5, 0, pres32/100, WHITE); |
|
| - | 132 | display1.printString (small_font, " ", 1, WHITE); |
|
| 101 | 133 | ||
| 102 | display1.display (); |
134 | display1.display (); |
| 103 | 135 | ||
| 104 | } |
136 | } |